Beta Crash Pegs (Axle Sliders)

Our crash pegs reliably protect your axles, swingarm and sensitive components in the event of a fall, preventing costly damage.

Thanks to their robust, shock-absorbing construction, they can withstand even tough supermoto use while providing a clean, high-quality visual upgrade.

The crash pegs are designed to fit your model perfectly and to maintain a safe, stable position.

They fit snugly, remain inconspicuous, and protect precisely where the highest forces are exerted in a fall.

The perfect upgrade to protect your bike from unnecessary repair costs while also enhancing its appearance.

📦 Scope of delivery:

• 4x crash pegs (front & rear)
  
• 2x continuous threaded rod

Assembly is quick and easy:

1. Mark
Mark the center of the axle nut (front and rear). The hole will be drilled there.

2. Drill a hole
Drill a hole of the appropriate size (diameter = threaded rod) on both sides of the axle.
Make sure to drill cleanly and straight.

3. Insert threaded rod
Push the threaded rod completely through the axle , from one side to the other.

4. Put on crash pegs
Place the crash pegs on the protruding threaded rods on the left and right sides.

5. Tighten by hand
Simply tighten the crash pegs by hand until both sides are secure, free of play and flush.

(The nuts are already integrated into the crash peg – no tools required.)

Done – the axle guard is in place.

⚠️ Safety instructions

• Check that the crash pegs are securely attached before each ride.
  
• Ensure that the axle can continue to rotate freely – nothing should rub.
  
• Crash pegs offer protection and a visual upgrade, but do not replace full crash protection .
  
• Damage can still occur – No liability for damages